Qnap QNA-T310G1T Connect to 10GbE - NBASE-T Networks Over Thunderbolt 3

With the QNA series adapters, you can connect your Mac and Windows® computers to a 10GbE network to enjoy access speeds of up to 1069 MB/s. With both Thunderbolt™ 3 and 10GbE connectivity, your data transfers will be faster than ever!

10GbE data transfer that media professionals need
As video resolutions move from 1080p, to 4K, 8K (and beyond) media creators are struggling with the storage and network requirements needed for editing huge multimedia files. The QNA-T310G1T features a Thunderbolt 3 to 10GbE Multi-Gigabit (10G/5G/2.5G/1G/100M) port, allowing you to easily add 10GbE connectivity to any Thunderbolt 3 device. Coupled with a QNAP 10GbE switch, a budget-friendly 10GbE environment can be created for creative studios to benefit from the incredible speed and bandwidth that 10GbE provides.

Stylish
The QNA series features a metallic bright-toned cover that fits perfectly alongside other devices.
Portable
The QNA series requires no extra power supply, and you can easily carry it around for universal deployment.
Heat Dissipation
The QNA series has shallow grooves on its top for effective heat dissipation.

Effortless setup
Simply connect a QNA adapter to your Mac or Windows® computer using the included Thunderbolt 3 cable and connect the adapter to a 10GbE-capable switch, NAS, or other device using a 10GbE cable (RJ45 Cat 5e/Cat 6a cable or above or a SFP+ DAC).

How to set the MTU
Mac: Open “System Preferences” → go to “Network” → Select the QNA Thunderbolt Ethernet → click “Advanced...” → go to the “Hardware” tab → change “Configure” to “Manually” → set “MTU” to “9000”.

Windows: Open "Settings" → go to "Network & Internet" → click "Change your adapter options" → right click on the Thunderbolt 3 Ethernet adapter and click "Properties" → click "Configure..." → go to the "Advanced" tab → select "Jumbo Frame" and set the value to "9KB MTU".

NAS: Open "Network & Virtual Switch" → go to "Network" > "Interfaces" → find the applicable Ethernet adapter, click  and select "Configure" → go to the "IPv4" tab → set "Jumbo Frame" to 9000.

SPECIFICATION
Network Adapters : Thunderbolt to 10GbE
PHY IC : AQC107S
I/O : 1 x Thunderbolt 3, 1 x 10GbE/NBASE-T connector
Transmission rates : 10Gbps/5Gbps/2.5Gbps/1Gbps/100Mbps
Package Contents : QNA-T310G1T, 0.5M Thunderbolt 3 cable and manual
Port and cable : RJ-45; Cat 6a cable recommended