-49%
Lian LI LANCOOL 3-X Black Premium Mid-Tower Chassis (G99.LAN3X.IN)
₹13,305.00
₹26,000.00
Ex Tax: ₹13,305.00
LANCOOL III
LANCOOL III, the premium mid-tower chassis, offers better thermal performance than LANCOOL II by including 4 pre-installed 140mm PWM fans, and featuring fine mesh panels designed to ensure ample airflow is delivered to the high-end components while the system runs at peak performance.
EXTREME AIRFLOW CRAFTMANSHIP
A fine mesh design has been implemented at the front, top, and both bottom side panels of the LANCOOL III.
HINGED PANELS ALL AROUND
The hinged tempered glass side panels offer an unobstructed view of the interior configuration, while the bottom shroud panels provide quick access to the PSU and storage drives.
FLEXIBLE CONFIGURATION
With ample interior room, the LANCOOL III can offer different cooling and usage scenarios
AIR Cooling
With high airflow stock fans, and air tower clearance up to 185mm, the LANCOOL III is ideal for an air-cooling build.
AIO Cooling
With ample front intake, the LANCOOL III can provide strong performance for an AIO cooling build. The top fan bracket can support up to 3 x 120mm/140mm fans and offers enough thickness clearance for an AIO with a 420 radiator/fan combo.
Custom Water Cooling
With the ability to support 3 × 360mm radiators simultaneously, the LANCOOL III can offer custom water-cooling enthusiasts, lots of imagination.
SPACIOUS COOLING SUPPORT
The LANCOOL III is optimized for water-cooling and high-end thermal solutions. A maximum of 10 × 120mm fans or a large 420mm radiator can be mounted in the main chamber.
Removable Top Fan Bracket
The removable top fan bracket with offset fan mounting points allows for a thicker fan and radiator combo to be installed at the top of the LANCOOL III by providing enough clearance from the ram.
Modular PSU Shroud Bracket – Fan/ Pump/ SSD
The adjustable modular PSU shroud bracket can accommodate 1 x 360mm radiator, 3 x 120mm fans, 3 x 2.5” SSDs, or a pump/reservoir combos.
Side Multi-Purpose Mounting Slots
Mounting slots beside the motherboard are provided at 105mm apart (standard 120mm fan mounting points) to allow the installation of a distro plate or a reservoir/pump bracket.
EXTENSIVE STORAGE CAPACITY
Multiple storage drive mounting locations are supported for up to 12 x 2.5” SSDs or 4 x 3.5” HDDs and 8 x 2.5” SSDs.
COMPREHENSIVE CABLE MANAGEMENT
As the second chamber located on the right side is visible, great consideration has been given to cable management. The LANCOOL III features an upgraded solution to ensure neat cable routing with toolless magnetic cable cover doors, and a well-organized layout for hubs and cables.
Sliding Cable Routing Cover
By slightly loosening the two back thumb screws, the cable cover can be adjusted to fit different sizes of motherboards.
REVERSIBLE FRONT I/O
Optimized for PC locate on a desk, the front I/O can be relocated to the bottom of the chassis.
FRIENDLY PSU INSTALLATION
The removable PSU mounting bracket allows for PSU installation outside of the chassis, to then slide it in through from the rear.
ANTI-SAG BRACKET FOR PERFECTLY HORIZONTAL GPU
A GPU anti-sag bracket is included for a seamless display of the hardware through the side tempered glass panels.
O11DE-1X/1W
The O11D EVO Vertical GPU kit is compatible with LANCOOL III, offering adjustable clearance beneath the vertical GPU by installing it in different expansion slots.
LAN3-1X/1W
A front, top and left side magnetic dust filter is offered to provide a higher level of dust filtration. Please note that the airflow will be impacted by the dust filters.
Technical Detail
Brand : LIAN LI
Modal : G99.LAN3X.IN
Technical Spec
PRODUCT NAME : LIAN LI LANCOOL III
MODEL : LANCOOL 3-X
COLOR Black : Black
DIMENSION : (D) 526mm x (W) 238mm x (H) 523mm
MOTHERBOARD : E-ATX (width: under 280mm)/ATX/MICRO-ATX/MINI-ITX
PSU CLEARANCE : ATX (Under 220mm)\
MATERIALS
Aluminum (Door handlesÆš.8mm SGCC (exterior and interior)
4.0mm tempered glass (both sides)
INCLUDED FANS
Front: 3 x 140mm PWM fans
(200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A)
Rear: 1x 140mm PWM fan
(200~1800 RPM / DC 12 V, 0.24A / 83.5 CFM / 2.3 mm H2O / 33dB-A)
FAN SUPPORT
Front (multi-way fan/radiator bracket): 3 x 120mm or 3 x 140mm
Top: 3 x 120 or 3 x 140mm
Rear: 1 x 120mm or 140mm
Above PSU Chamber: 3 x 120mm
RADIATOR SUPPORT
Front: 360mm or 280mm
Top: 360mm or 420mm
Above PSU Chamber: 360mm
GPU LENGTH CLEARANCE : 435mm (Max)
CPU HEIGHT CLEARANCE : 187mm (Max)
STORAGE
Behind MB tray: 2 x 2.5″ SSD
Behind right side PSU shroud panel: 3 x 2.5’’ SSD
Hard drive cage: 4 x 3.5″ HDD/2.5″ SSD
Above PSU chamber: 3 x 2.5″ SSD
EXPANSION SLOT : 8
IO PORTS
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio 1 x Power Button
1 x Reset Button
1 x Light Color Button (C)
1 x Light Mode Button (M)
2 x USB 3.0
1 x USB Type C
1 x Audio
DUST FILTERS : 1 x Bottom (Tray)