Lian Li LANCOOL 216 Black Mid-Tower Chassis (G99.LAN216RX.IN)

 

AIRFLOW FOCUS
The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow.
 
CONTINUOUS FRONT TO nTOP MESH
To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel.
 
LANCOOL 216 RGB FANS
The included 160mm ARGB fans feature two channels of LEDs (one on the outer rim of the fan, another at the shaft of the fan blades) that can be controlled separately via an optional accessory, or via the motherboard lighting software BY connecting them directly to a motherboard 5V 3pin header.
 
AIR COOLING MODE / WATER COOLING MODE
The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems.
 
FRONT I/O CAN BE RELOCATED
Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel.
 
HARDWARE COMPATIBILITY
The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected.
 
LATEST GEN. GPU READY
With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards.
 
REMOVEABLE TOP RADIATOR BRACKET
The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance.
 
PCIE FAN BRACKET
The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system.
 
VERTICAL GPU COMPATIBLE
The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required.
 
DUST FILTER
For users who take dust management to the next level, a magnetic front panel dust filter is available as an optional accessory. The dust filter fits perfectly between the front panel and the front fans.
 
PCIE CABLE
For vertical GPU mounting, only an additional riser cable is required. With a PCB that has a hole spacing of 112.7mm, the Lian-Li PCIe 4.0 X16 RISER CABLE is compatible with the LANCOOL 216
 
Technical Detail
Brand : Lian Li
Modal : G99.LAN216RX.IN
 
Technical Spec
MODEL : LANCOOL 216
DIMENSIONS : (D) 480.9mm x (W) 235mm x (H) 491.7mm
COLOR : Black
MATERIAL : Steel / 4.0mm Tempered Glass
MOTHERBOARD SUPPORT : E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX
 
FAN SUPPORT
Top: 3 x 120mm / 2 x 140mm
PSU Cover : 2 x 120mm / 2 x 140mm (Air Cooling mode)
Front : 3 x 120mm / 2 x 140mm / 2 x 160mm
Rear : 1 x 120mm / 1 x 140mm
PCIe Fan Bracket: 1 x 120mm
 
RADIATOR SUPPORT
Front: 360 / 280 / 240mm
Top : 360 / 280 / 240mm
Bottom : 240mm
 
PSU SUPPORT LENGTH
ATX (Under 220mm)
GPU LENGTH CLEARANCE : 392mm (max)
CPU COOLER HEIGHT CLEARANCE : 180.5mm (max)
 
DRIVE 
Drive Cage：2 x 2.5” SSD + 2 x 3.5” HDD
PSU Cover ： 2 x 2.5” SSD
Behind MB tray : 2 x 2.5” SSD
 
EXPANSION SLOT 
7 Slot 
 
I/O PORTS  
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio
 
INCLUDED FANS

LANCOOL 216 RGB
Front: 2 x 160mm ARGB Fans
Rear: 1 x 140mm PWM Fan
LANCOOL 216
Front: 2 x 160mm PWM Fans
Rear: 1 x 140mm PWM Fan
 
DUST FILTERS
1 x Bottom