Lian Li LANCOOL 216 Black Mid-Tower Case (G99.LAN216X.IN)

Lian Li LANCOOL 216 Black Mid-Tower Case (G99.LAN216X.IN)
LANCOOL 216 AIRFLOW FOCUS
The LANCOOL 216 is a mainstream case that features all-around mesh panels for optimal airflow. Thanks to its modular rear panel, it can be optimized for air cooling or water cooling. It includes 2 x 160mm and 1 x 140mm pre-installed PWM fans and an innovative rear PCIe fan bracket to maximize airflow

CONTINUOUS FRONT TO TOP MESH
To ensure adequate airflow is provided to the system, the LANCOOL 216 features mesh at the front, top, and on the PSU shroud’s side*. The front mesh extends to the top for a continuous mesh panel

AIR COOLING MODE / WATER COOLING MODE
The modular motherboard I/O allow users to move the motherboard to a higher position which is more favorable for air-cooled systems, or a lower position for water-cooled systems

AIR COOLING
Set higher, the motherboard leaves room above the PSU shroud for wider fans

WATER COOLING
Set lower, the motherboard leaves a 63mm thick gap at the top to install radiator/fan combos, ideal for AIOs or custom water cooling

FRONT I/O CAN BE RELOCATED
Including a power button, reset button, audio port, 2x USB3.0 ports, and a USB Type C port, the front I/O module can be relocated to the lower left side of the front panel

HARDWARE COMPATIBILITY
The LANCOOL 216 supports ATX, Micro-ATX, MINI-ITX motherboards, and E-ATX under 280mm in width (when the grommet bar is flipped 180°). In addition, thanks to its symmetrical design, cable management in the 2nd chamber remains unaffected

LATEST GEN. GPU READY
With enough room for graphics cards up to 392mm in length, and 180mm in height (for air cooling mode), the LANCOOL 216 is compatible with even the largest NVIDIA 4000 series cards

PRESSURE LEAK FREE
Pre-installed at the front of the top radiator bracket, a seal plate ensures no pressure leak is created when installing smaller than a 360 radiator/3x120mm fans at the top

REMOVEABLE TOP RADIATOR BRACKET
The top mounting bracket can be completely removed from the case for easier hardware installation. The bracket comes off with the left side frame bar to provide optimal clearance

PCIE FAN BRACKET
The GPU placed at the top of the expansion slots in air cooling mode opens up the possibility to add a 120mm fan at the rear of the case without obstructing the GPU I/O. This is also possible with a vertically mounted GPU in both air-cooled and water-cooled mode. The additional 120mm fan provides better cooling for the GPU and a greater intake/exhaust balance for the system

VERTICAL GPU COMPATIBLE
The PCIe expansion slot panel can be rotated to vertically install the GPUs, only an additional riser cable is required

CABLE MANAGEMENT
The LANCOOL 216 offers multiple options for easy cable management. Along the cable grommet bar, 3 large velcro straps can hold 2 different sets of cables. 3 small clips are located along the rear side panel, ideal for cleanly routing the CPU 8pin cable, and 2 additional velcro straps are located near the PSU chamber to help hold down the extra PSU cable length away from the ventilation path in the bottom chamber

Technical Detail
Brand : LIAN LI
Model : G99.LAN216X.IN

Technical Spec
DIMENSIONS : (D) 480.9mm x (W) 235mm x (H) 491.7mm
COLOR : Black
MATERIAL : Steel / 4.0mm Tempered Glass
MOTHERBOARD SUPPORT : E-ATX (Under 280mm)/ATX/Micro-ATX/Mini-ITX

FAN SUPPORT
Top: 3 x 120mm / 2 x 140mm
PSU Cover: 2 x 120mm / 2 x 140mm (Air Cooling mode)
Front: 3 x 120mm / 2 x 140mm / 2 x 160mm
Rear: 1 x 120mm / 1 x 140mm (Not compatible with UNI FAN SL-INF 140)
PCIe Fan Bracket: 1 x 120mm

RADIATOR SUPPORT
Front: 360 / 280 / 240mm
Top: 360 / 280 / 240mm
Bottom: 240mm

PSU SUPPORT LENGTH : ATX (Under 220mm)
GPU LENGTH CLEARANCE : 392mm (max)
CPU COOLER HEIGHT CLEARANCE : 180.5mm (max)

DRIVE
Drive Cage：2 x 2.5” SSD + 2 x 3.5” HDD
PSU Cover：2 x 2.5” SSD
Behind MB tray: 2 x 2.5” SSD

EXPANSION SLOT : 7

I/O PORTS
1 x Power Button
1 x Reset Button
2 x USB 3.0
1 x USB Type C
1 x Audio

INCLUDED FANS
Front: 2 x 160mm PWM Fans
Rear: 1 x 140mm PWM Fan

DUST FILTERS : 1 x Bottom