Arctic Liquid Freezer III 360 A-RGB Black CPU Water Cooler (ACFRE00144A)

Key Features

Ready Out-of-the-Box - Easy Installation

The Liquid Freezer III is ready for immediate use thanks to its pre-installed radiator fans in push configuration. The fan cables are integrated into the jacket of the hoses so that only one cable needs to be connected to the motherboard. With the MX-6 thermal compound included in delivery, you have everything you need for quick and easy installation.

Liquid Freezer III 360 A-RGB – Tested and Confirmed by Intel

Intel has tested and confirmed the Liquid Freezer III on the i9-13900K/KF, i9-14900K/KF and i9-13900KS in the Enthusiast and Desktop category. In these tests, Intel considered both the mounting with contact frame and the cooler's performance.

Future-Proof Compatibility

The Liquid Freezer III is multi-compatible with Intel and AMD sockets. Intel will release the new Arrow Lake processors on the LGA1851 socket in the future. We guarantee full compatibility. All Liquid Freezer III can be used with the new LGA1851 socket from Intel without limitation.

Outstanding Performance

In independent tests, the Liquid Freezer III clearly stands out from the competition in all price categories, particularly due to its outstanding performance. In noise normalised tests, the Liquid Freezer III shows its true strength, outperforming many competitors with its quiet yet powerful operation.

Contact Frame for Intel LGA1700 and LGA1851

Intel's Independent Loading Mechanism (ILM) deforms the CPU by pressing it into the socket at two points with over 40 kg. This causes pressure in the PCB, the die and the solder layer between the die and IHS (Integrated Heat Spreader). With high thermal load, this can lead to long-term problems. The mounting frame from ARCTIC does not deform the CPU, reduces the mechanical load on the CPU massively, is quick and easy to install and allows the cooler to be screwed onto the CPU's backplate. As a result, mechanical stress on the mainboard and CPU is minimised, cooling performance remains consistent and installation is quick and uncomplicated.

Silent and Powerful VRM Fan

The voltage converters of motherboards often work at their maximum temperature in combination with power-hungry CPUs. To compensate the lack of airflow from a tower cooler, the Liquid Freezer III works with a revised VRM fan. The 60 mm PWM-controlled fan enables almost silent cooling of the socket area when VRM cooling is insufficient, in cases with poor airflow or especially in overclocking scenarios. This enables a continuously higher load and a longer service life for the voltage converters.

Integrated Cable Management

The fan cables are hidden within the sleeving. With the Liquid Freezer III, only the connectors from the pump head need to be connected to the motherboard—no additional cable routing required. No extra splitter cables are needed, which simplifies installation and improves the overall look.

Native AMD Offset Mounting

For several generations, AMD has been using a multi-die chiplet design for its Ryzen desktop processors. Unlike Intel CPUs, the hotspot on these processors is not located centrally under the IHS (Integrated Heat Spreader), but is slightly offset. The AMD mounting solution therefore has a 5 mm offset in order to achieve optimum heat dissipation.

Improved Radiator Design

The cooling surface of the 38 mm thick radiator has been extended by 23 % by increasing the fin stack. This not only enables improved heat dissipation, but also a larger liquid volume. Consequently, the heat build-up in the water cooling system is slowed down and power and temperature peaks can be effectively managed over a longer period of time.

Limited Compatibility with Few Motherboards

Some motherboards are incompatible with the Liquid Freezer III due to oversized SSD coolers in the M.2_1 slot. We provide a suitable M.2 cooler free of charge for affected motherboards.

Quality You Can Rely On

To ensure the longevity of our products, we carry out long-term tests under different, sometimes very adverse conditions. In this way, we learn how we can permanently improve our products for our customers. In addition, the excellent results of long-term testing give us the assurance that our products are not only outstanding in terms of quality, but also in terms of durability. This is a certainty that we are happy to pass on to our customers, which is why we give a 6-year manufacturer's guarantee.

Specification

Compatibillity

Intel : 1851, 1700

AMD : AM5, AM4

PI | NNPI : 338 | 309

TIM : MX-6 (0.8 g)

Operating Ambient Temperature : 0—40 °C

LED Connector : 3-Pin A-RGB Connector

All-In-One Connector : 4-Pin PWM Connector

Splitt Connector : 3x 4-Pin PWM Connector

Pump

Pump : 800—2800 rpm (PWM controlled)

Current | Voltage : 0.35 A | 12 V DC

Cold Plate : Copper, Micro Skived Fins

Tube Length : 450 mm

Tube Diameter : Outer: 12.4 mm

Inner : 6.0 mm

Radiator

Material : Aluminium

Dimensions : 398 (L) x 120 (W) x 38 (H) mm

VRM Module

VRM Fan : 400—2500 rpm (PWM controlled)

Current | Voltage : 0.05 A | 12 V DC

LED : 12x A-RGB LEDs

Current | Voltage : 0.40 A | 5 V DC

Radiator Fans

Fan : 3x P12 PWM PST A-RGB

Speed : 200—2000 rpm

Air Flow : 48.82 cfm | 82.91 m3/h

Static Pressure : 1.85 mmH2O

Bearing : Fluid Dynamic Bearing

Current | Voltage : 0.11 A | 12 V DC

Cable Lenght : 40 mm

Connector : 4-Pin PWM Connector

RGB

LEDs : 12x A-RGB LEDs

Current | Voltage : 0.40 V | 5 V DC

Cable Lenght : 40 mm + 80 mm Splitter Cable

Connector : 3-Pin A-RGB Connector + 3-Pin Plug

Packaging

Width : 167 mm

Height : 142 mm

Length : 414 mm